Rare Rides: The Luxurious 1972 Fiat 130 Coupe

Corey Lewis
by Corey Lewis

Rare Rides has featured a couple of Fiat coupes lately, their special, swoopy bodies representing redesign work carried out by Allemano and Vignale. Today’s Rare Ride comes to us from Pininfarina, and though it’s not as swoopy or special, I like it even more.

Though all wore the same 130 badge, the coupe version of Fiat’s executive class car for the Seventies was very different than its four-door sedan sibling. Paolo Martin ( Lancia Beta Montecarlo, Rolls-Royce Camargue) applied his blocky styling eye to develop a thoroughly Seventies Modern coupe. In addition to a different exterior shape, his design featured a different interior to the other two body styles in the lineup.

While the sedan debuted in 1969, customers waited until spring 1971 for the debut of the coupe. Befitting its flagship mission, it was built at Pininfarina instead of at the Fiat factory. At introduction, the 130 coupe featured a new engine. Known as the 130 Type B, the 3.2-liter V6 used dual overhead cams and produced 165 horsepower. Sedan 130s made do with just 2.8 liters of displacement through 1971. At that point, Type A cars were upgraded with the engine and some interior cues from the coupe, becoming Type Bs. Transmissions on offer were a five-speed manual or three-speed automatic. Coupes had a party trick, too: The driver could pull a lever to remotely open the passenger side door.

The 130 coupe immediately won a design award, but Mr. Martin departed Pininfarina almost immediately afterward. Other design talents were put to work coming up with more Fiat 130 variations, which culminated in the presentation of a two-door shooting brake (the Maremma) and a stylish sedan called Opera. Fiat rejected both, and wanted no further variations on 130.

Perhaps the decline was understandable, as the big, pricey Fiats were slow to move at dealers. Between 1969 and 1976, production of the 130 sedan totaled just over 15,000. While the coupe remained in production until 1977, just 4,294 were made, overall. There was no successor model to the 130 range, as Fiat exited the large executive car class permanently.

Today’s light blue 130 coupe features a tan interior, which is less stunning than the orange velour that blessed some examples. Already restored, this particular car hails from very early in the model’s production (it is the eighth one built). Yours for $29,000.

[Images: seller]

Corey Lewis
Corey Lewis

Interested in lots of cars and their various historical contexts. Started writing articles for TTAC in late 2016, when my first posts were QOTDs. From there I started a few new series like Rare Rides, Buy/Drive/Burn, Abandoned History, and most recently Rare Rides Icons. Operating from a home base in Cincinnati, Ohio, a relative auto journalist dead zone. Many of my articles are prompted by something I'll see on social media that sparks my interest and causes me to research. Finding articles and information from the early days of the internet and beyond that covers the little details lost to time: trim packages, color and wheel choices, interior fabrics. Beyond those, I'm fascinated by automotive industry experiments, both failures and successes. Lately I've taken an interest in AI, and generating "what if" type images for car models long dead. Reincarnating a modern Toyota Paseo, Lincoln Mark IX, or Isuzu Trooper through a text prompt is fun. Fun to post them on Twitter too, and watch people overreact. To that end, the social media I use most is Twitter, @CoreyLewis86. I also contribute pieces for Forbes Wheels and Forbes Home.

More by Corey Lewis

Comments
Join the conversation
3 of 27 comments
  • Amwhalbi My 1972 Mercury Capri was my first stick shift car. God, I miss that thing. It was a blast to drive.
  • Vid169489471 The technology exists today to produce a variable color temperature (kelvin) LED lamp. It can vary from 2700k that soft orange look to 6500k the bright daylight with the bluish tint.Since everything in a late model car is computer controlled, it would be an easy task to write a few lines of code that enables your vehicle to not only dim down from hi to low beam but to shift color temp down to the 2700k range for oncoming traffic, then back up to 5000k once oncoming traffic has passed. For the operator it would be automatic and seamless. For older cars they could be retrofitted with LEDs that are 2700k on low beam and 5000k on hi beam. As far as standards, there could be a lumens max, and a minimum. Several States already have minimum lumen standards going back to the old incandescent bulbs. Why not update these to national standards.
  • Jam169859557 More regulation is needed for ALL vehicle lighting systems. [list=1][*]The lighting that is most blinding are the rapidly flashing red, blue and amber lights on emergency vehicles. The lights themselves are blinding, flashing so rapidly that it's impossible for even the sharpest eyes to adjust. What's worse, is the nature of the emergency requires a careful view of the area surrounding the emergency vehicle. There is something going on that needs to be seen. More flashing lights is not the solution.[/*][*]Brighter headlights need to be regulated. The tall riding vehicles do not need headlights positioned so high that they blind drivers in lower riding vehicles. And those heasdlights need to be aimed properly. When I first started driving my 2020 Subaru Outback, many drivers would flash their lights, hoping I would dim my lights. This stopped after I performed am easy adjustment that tilted the beam lower. Late model Subaru headlamps are designed with a sharp cutoff that project less glare above the hood line. When the headlights are properly aimed, other drivers are not blinded by the beam.[/*][*]Customized light assemblies make it more difficult to see the marker lights (tail lamps, turn signals and side marker lamps) that have been tinted. There are many municiple codes that prohibit this tinting, but these laws are seldom enforced.[/*][/list=1]Solutions: Tight controls on emergency vehicle lighting. In trying to make these vehicles more visible, a dangerous side effect is reducing the ability of drivers to see the surrounding perils.Headlight design regulations that reduce the height of the headlight assemblies. Just because a pickup truck has a hood that sits 4 feet abouve the pavement, it does not mean the headlights need to be so high. Owneres should maintain proper adjustments to their vehicle headlights.Establish and enforce regulation requiring a illumination standard be followed.
  • Stl170698708 as someone who hates big government, and their interference;but you can add me to the list of people that are blinded by the lights.unfortunately "the poop is out of the horse and no way is it going back in"They have had 5 years to make lights bigger, badder and brighter because in the vehicle work it is go big or go home!Trucks are the worst because so many people use them to express their dominance and that is big, big, big $$ both at the Original Purchase and in the Aftermarket world.If, we are so lucky to get some good government regulation on this it will also take some very good Court enforcement to get the aftermarket people with fines and lawsuits.Much like the EPA did with the Diesel Tuner Industry that felt emission regulations didn't apply to them.This is from someone that owns said pickup truck with the same bright headlights,but i only use the truck when I have too and always turn off the Fog lights when driving in traffic.
  • Art65765977 I saw a porsche 911 with the most amazing headlights from behind approaching the Sunshine skyway in Florida. The pattern was 108 degrees across sweeping the road like a broom. My brother and I were amazed. I don't know what it looked like from the front but i am sure it was better than American cars
Next