Have No Fear, Bowtie Faithful: the Chevrolet Camaro Will Not Wear a Holden Badge in Australia

by Timothy Cain

Published: October 10th, 2017

have no fear bowtie faithful the chevrolet camaro will not wear a holden badge in

General Motors’ Australian outpost is losing all of its domestic production, but that doesn’t mean Holden is shutting down all of its Australian development operations.

Late last month, we told you the Chevrolet Camaro was going to become a right-hand-drive model five years earlier than originally planned because of special rebuilds by GM’s Holden division.

But once the Chevrolet Camaro goes on sale Down Under, it will not wear the local GM badge.

Rather, Chevrolet’s bowtie will remain affixed to the grille of the sixth-gen Camaro.

Of course, the Camaro remains unconfirmed for the Australian market. According to Australia’s Drive, Holden’s communications director Sean Poppitt referred this week to the Camaro as “the mysterious sports car that we’ve talked about,” while clarifying that some competitors — namely Ford, with its huge global hit of a sixth-gen Mustang — moved more quickly into right-hand-drive markets. By taking a car that is not designed to be right-hand-drive and forcing it to become right-hand-drive, the cost of the Camaro will rise quite sharply. It won’t be competitively priced with the Mustang in Australia.

But it is almost certainly destined to exist. Holden Special Vehicles spokesperson Damon Paull says, “I have read reports about the Camaro coming but we have no comment.” Hardly a denial.

Likewise, Poppitt refused to speak directly about the Camaro, but he informed Drive about the potential branding strategy. “I think it has to wear a Chevrolet badge, it absolutely does,” the Holden communications boss says. “It’s intrinsic to its DNA and to what it stood for, for decades in the U.S., and globally.”

You better believe it. While the Corvette stands off to the side as a near separate entity, the Camaro is proudly Chevrolet.

Last month in the United States, Camaro volume rose 13 percent to a class-topping 7,430 September sales. That made September 2017 the best September for the Camaro since 2009, the Camaro’s year of rebirth. In Australia, Holden Special Vehicles will likely build 1,000 right-hand-drive Camaros per year.

Timothy Cain is a contributing analyst at The Truth About Cars and Autofocus.ca and the founder and former editor of GoodCarBadCar.net. Follow on Twitter @timcaincars and Instagram.

#Australia #Bowtie #Chevrolet #ChevroletCamaro #FutureVehicles #Holden #HoldenSpecialVehicles #RightHandDrive #RightHandDriveConversion

Timothy Cain

More by Timothy Cain

Comments

Join the conversation

2 of 22 comments

Cognoscenti on Oct 11, 2017

Naysayers to the idea of a Camaro wearing the Bowtie in Australia are forgetting that there is a significant group of folks who know and love classic American muscle cars, including the Chevy Camaro. Take a look for yourself! https://www.australianmusclecarsales.com.au/muscle/us_muscle.html http://www.americanmusclecars.com.au/ Consider this point in light of the Camaro design being so heavily influenced by nostalgia, and it starts to make more and more sense.

Like Reply
Spike_in_Brisbane on Oct 11, 2017

Since so much of the rebirth of Camaro was engineered in Australia, it's a shame that the capability to be either left or right hand drive was not built in. The European and Japanese manufacturers seem to have no trouble with the concept.

Like Reply

Recent Comments

Amwhalbi My 1972 Mercury Capri was my first stick shift car. God, I miss that thing. It was a blast to drive.
Vid169489471 The technology exists today to produce a variable color temperature (kelvin) LED lamp. It can vary from 2700k that soft orange look to 6500k the bright daylight with the bluish tint.Since everything in a late model car is computer controlled, it would be an easy task to write a few lines of code that enables your vehicle to not only dim down from hi to low beam but to shift color temp down to the 2700k range for oncoming traffic, then back up to 5000k once oncoming traffic has passed. For the operator it would be automatic and seamless. For older cars they could be retrofitted with LEDs that are 2700k on low beam and 5000k on hi beam. As far as standards, there could be a lumens max, and a minimum. Several States already have minimum lumen standards going back to the old incandescent bulbs. Why not update these to national standards.
Jam169859557 More regulation is needed for ALL vehicle lighting systems. [list=1][*]The lighting that is most blinding are the rapidly flashing red, blue and amber lights on emergency vehicles. The lights themselves are blinding, flashing so rapidly that it's impossible for even the sharpest eyes to adjust. What's worse, is the nature of the emergency requires a careful view of the area surrounding the emergency vehicle. There is something going on that needs to be seen. More flashing lights is not the solution.[/*][*]Brighter headlights need to be regulated. The tall riding vehicles do not need headlights positioned so high that they blind drivers in lower riding vehicles. And those heasdlights need to be aimed properly. When I first started driving my 2020 Subaru Outback, many drivers would flash their lights, hoping I would dim my lights. This stopped after I performed am easy adjustment that tilted the beam lower. Late model Subaru headlamps are designed with a sharp cutoff that project less glare above the hood line. When the headlights are properly aimed, other drivers are not blinded by the beam.[/*][*]Customized light assemblies make it more difficult to see the marker lights (tail lamps, turn signals and side marker lamps) that have been tinted. There are many municiple codes that prohibit this tinting, but these laws are seldom enforced.[/*][/list=1]Solutions: Tight controls on emergency vehicle lighting. In trying to make these vehicles more visible, a dangerous side effect is reducing the ability of drivers to see the surrounding perils.Headlight design regulations that reduce the height of the headlight assemblies. Just because a pickup truck has a hood that sits 4 feet abouve the pavement, it does not mean the headlights need to be so high. Owneres should maintain proper adjustments to their vehicle headlights.Establish and enforce regulation requiring a illumination standard be followed.
Stl170698708 as someone who hates big government, and their interference;but you can add me to the list of people that are blinded by the lights.unfortunately "the poop is out of the horse and no way is it going back in"They have had 5 years to make lights bigger, badder and brighter because in the vehicle work it is go big or go home!Trucks are the worst because so many people use them to express their dominance and that is big, big, big $$ both at the Original Purchase and in the Aftermarket world.If, we are so lucky to get some good government regulation on this it will also take some very good Court enforcement to get the aftermarket people with fines and lawsuits.Much like the EPA did with the Diesel Tuner Industry that felt emission regulations didn't apply to them.This is from someone that owns said pickup truck with the same bright headlights,but i only use the truck when I have too and always turn off the Fog lights when driving in traffic.
Art65765977 I saw a porsche 911 with the most amazing headlights from behind approaching the Sunshine skyway in Florida. The pattern was 108 degrees across sweeping the road like a broom. My brother and I were amazed. I don't know what it looked like from the front but i am sure it was better than American cars