Piston Slap: Of Antique Trucks and Rebuilt Brakes
TJ writes:
My New Year’s resolution this year was to get my grandfather’s 1979 Chevy C10 running and driving again. It’s been parked in the garage since I drove it in there when my wife and I moved into our house in spring 2012. I stopped driving it because the transmission needed (another) rebuild and I didn’t have the time or money then. I’ve managed to get it running (full carb cleaning and new sending unit in the tank) and it will idle after some urging.
Now the next issue: I decided to check the brakes by jacking up first one end then the other and spinning the tires, then having someone step on the brakes (my 4 year old loved it). 3 out of 4 wheels spin, but the brakes don’t stop more spinning. The front passenger is stuck. I was able to get the rotor to turn some with a breaker bar. I could also hear some dragging in the rear passenger drum, but I was still able to turn it by hand. The pedal has some firmness, but not a lot and it doesn’t get hard after the engine is off (have to check the booster once I get the brakes working).
My first thought is to replace the front calipers and rotors (rotors probably need it anyway) and wheel bearings, since the rotors will be off. I’m not above rebuilding the rear drums also. Before I drop a bunch of money on parts, I thought I’d reach out for advice.
Sajeev answers:
A funny thing happened this Tuesday, hours before I got to this query: after 500-ish miles of pleasant motoring in my restored 1989 Lincoln Continental ( TTAC’s Pilot Fish for that other V6 Ford), the front left caliper started sticking. I got to my destination without catching on fire but it’s still frustrating, considering the time (3-ish years) and money (don’t ask) spent fixing everything that looked wrong.
And several mechanics inspected the brakes, but you can’t eyeball the failing guts of a brake caliper, or the internal collapsing of a brake line. So what’s my point?
You better believe you’re replacing/turning/rebuilding:
- Front Calipers/Pads, Rear Shoes/Wheel Cylinders
- Front Rotors and Rear Drums
- Rebuilding the other guts inside those drums
- Replacing ALL Rubber Brake Lines (three, according to RockAuto)
The C-10 brake bits are pretty cheap online, not super cheap compared to what I just ordered: everything to rebuild mine was $75, including shipping. Everything: mid-quality rotors, rebuilt calipers, Raybestos rubber lines and even Robocop-Car spec pads…yes, the latter really is a thing.
Ah, the joys of owning a high volume/low interest antique vehicle: all the hard work with none of the fame or fortune. So when all the stoppie bits (technical term) arrive next week, I look forward to my next donut with my Cop Car infused Continental. (I’ll do the rear brakes later, I promise.)
[Images: B ring a Trailer, Sajeev Mehta]
Send your queries to sajeev@thetruthaboutcars.com. Spare no details and ask for a speedy resolution if you’re in a hurry…but be realistic, and use your make/model specific forums instead of TTAC for more timely advice.
More by Sajeev Mehta
Latest Car Reviews
Read moreLatest Product Reviews
Read moreRecent Comments
- Bd2 what the world needs now is a new Ford F150 like I need a hole in the head
- 6.2deadlifters the only good the orange underwear stain is goof for is raising EV adoption..
- Ras815 Classy? Sure. But timeless, nah. The R107 really looks absolutely and unflinchingly of its time. No one today would ever mistake this being for a modern automobile.
- Master Baiter An electric motor and reduction gear driving a vehicle's wheels is superior in every way. The problem is the battery--it's heavy, expensive, and it does wear out eventually. I'd expect an EV battery to last 20 years if treated properly. Battery power creates a scale problem--add battery to add range and you add weight, which in turns requires more battery to deal with the extra weight, etc... You can forget about EV pickups, and forget about an EV for towing, at least until batteries roughly double in performance, which won't be for 20 or 30 years into the future.
- The original ToolGuy™ INSATIABLE DEMAND!!! for used EVs lmao
Comments
Join the conversation
My fantasy truck is a late 70s boxy Chevy shortbed, where the long hood and short bed almost make it look like an awkward sedan...painted poo brown with the off-white toilet paper stripe along the side...with little dog-dish hubcaps on white steelies. THIS GUY HAS MY TRUCK. It pleases me just to know it exists, whether it can stop or not.
TJ, Everything Sajeev and Nate said. Enjoy your truck - built before GM decided they could skip the primer coat, like they did on mine - lol.