TTAC Project Car: It's About Time!

by Sajeev Mehta

Published: December 7th, 2018

The prolonged journey of TTAC’s Ford Sierra is partly because of my prolonged recovery from Stevens-Johnson Syndrome. While other projects never help matters, the excuses end now.Because, even during the depths of my recovery, my vision never faltered; thanks to prednisone’s side effects during treatment, said vision became a C4 Corvette-like laser-infused slalom but with Young the Giant screeching in the background.So it’s about time I drove to my friend Brian’s shop and made it happen.

Let’s do it, but remember the mission: to improve performance via Ford donor cars of the era, honoring the time when boneheaded computers made radical aerodynamic shapes that altered our automotive landscape.The 1989 Merkur XR4ti’s superior suspension, brakes and larger differential bolted up easily, but our donor had a bashed engine crossmember. Mercifully, the Sierra’s unit accepted everything up front — being right hand drive wasn’t an issue!Upgrades include Koni shocks and rear disc brakes from one of the Thunderbird donor cars.

Adding American ingenuity to West German engineering involved upgraded rolling stock… parts of which haven’t been rolling for years. This better work!

Can you say sleeper?The choice of the 15×7-inch Ford Mustang 10-hole (teledial) wheels (with grippy Spec Miata rain tires) is the widest setup to fit a stock chassis. And these Fox Body wheels provide the perfect offset and 1980s aerodynamic swagger for a Ghia-spec, near-luxury, British family car.

While no Chevy Nova on slicks, the difference from a 165 mm, 13-inch wheel to a 205 mm, 15-incher gives the little Ford a tough demeanor.No wonder the Bondurant Driving School used them on their Merkurs!

Since the body was ready to test fit its new motor, we spent hours determining the best bits: parts from a 1985 and 1987 Thunderbird Turbo, plus the 1989 Merkur gave us options.I also splashed the cash on ported intakes (one is on the right), even a ported and ceramic-coated “E6” exhaust manifold (the better flowing option).

The most important bit was the larger Garrett T3 from earlier turbo Fords, seen here getting a clean with leftover cam covers (destined to be garage art).

Those factory covers were cool, until the uber-rare Ford Motorsport cam cover (finished in brown like the motor, ‘natch) hit my Facebook feed. And it’s beyond worthy considering there’s a BoPort 2.1 roller camshaft within.So let’s get that motor installed!

Out goes the Nova so the Sierra can get its new engine. Except not.The fancy aluminum engine mounts/brackets of a Merkur’s 2.3-liter turbo “Lima” are 2 inches wider than the Sierra’s 2.0L “Pinto” crossmember.We huffed, we puffed, we failed: why, oh why, did our donor car have a smashed crossmember? That’s one bit we cannot replicate (easily).

Mercifully the Turbo Ford community on Facebook is strong, and a solid Merkur XR4ti crossmember was boxed up within hours of hitting this brick wall. Apparently those addicted to social media are not always clueless!While this won’t be the last roadblock, it hopefully was the worst.

 Why? Because everything else in our parts cache is appears intact, as they were pulled from running vehicles.The only thing missing to complete the engine swap is a low-mount alternator: it shall clean up the engine bay and smooth out/shorten the distance from the (aftermarket front-mount) intercooler to the throttle body. Shouldn’t be hard considering the Sierra has no power steering or A/C to complicate matters, right?

Oh Google Image Search, what wonders you find us!Here’s to hoping the local junkyards have a 92-94 only (yes, really) Ford Ranger with these brackets and pulleys. I’m visiting one with a complete (looking?) 1992 Ranger shortly after I hit the send button on this article!Not to worry, the Sierra’s time will come. Soon.[Images:© 2018 Sajeev Mehta and Mustangforums.com]

#2.3Turbo #Boport #Ford #FordSierra #FordSierraGhia #Ghia #Lima #MerkurSwap #MerkurXR4Ti #Restomod #Turbo #TurboCoupe #TTACProjectCar #TurboFord #TurboFordSwap

Sajeev Mehta

More by Sajeev Mehta

Comments

Join the conversation

2 of 23 comments

Ford.scorpio on Dec 08, 2018

Good morning, very nice article! I have the ranger set up & brackets if you need them including PS pump. You can find me on the merkurclub forum; just listed some XR's... Jan

Like Reply
Art Vandelay on Dec 09, 2018

I need a Lima 2.3T in my life. I think an 85-88 Thunderbird Turbo would fit the bill. But then I'd be tempted to try to make an ecoboost 3.5 fit.

Like Reply

Recent Comments

Forward Observer Tesla cash on hand is $45 billion. That is a large mattress.Ford Motor Company market cap is $46 billion. Wait, forget I said that.
Pianoboy57 I would never buy this even if i had the money. What makes it so special? Limited Edition? That doesn't mean anything at the BHPH lot.
6.2deadlifters Because of the current administration no cheap car can exist. US worker SalariesUS sourced materials with costs from US salaries aquiring materials.US UnionsUS corporationsTARIFFS against trade partnersAll these things prevent a 'good' 'reliable' 20,000$ 4-door 4-passanger car capable of 4-start offset and side impact crash protection.Game-Set-Match, end of line. No possible outcome. No discussion possible. every american loses.
Forward Observer The last time I had a door off my truck I hung it from my Little Giant ladder. But I was only replacing the hinge pins.I'm sorry if this sounds smarmy or smug, I am working on my people skills. (My therapist says I have a long way to go to catch up with some of you.) Would smarmy and smug come in handy if I worked for an automotive dealership? (I wonder.)
Arthur Dailey Auto 'journalists' should stop referencing the average new car purchase price and instead report on the mean price. We all understand that the glue of luxury vehicles and full size pickups inflate the average price.For me, 'affordable' hovers around the $35k mark.Under current N.A. standards, hatchbacks, stations wagons and non-luxury coupes are basically a lost cause.Personally I would like to see Canada convert to accepting vehicles that have passed the European standards, rather than adhering only to N.A. standards. That would allow for the importation of vehicles such as Dacias, Skodas, and yes more Fiats. Also some models for Japanese and Korean manufacturers that currently are not sold in North America. It may even help Mitsubishi in the Canadian market and allow for the return of Suzuki. Having more small, affordable vehicles available is not a bad thing.